Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AKROMID® T5 GF 50 black (6247) - PPA-GF50 - Akro-Plastic GmbH

Material Data Center offers the following functions for AKROMID® T5 GF 50 black (6247):
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Akromid T datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.2 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.5 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 20000 / 20000 MPa ISO 527
Stress at break 280 / 280 MPa ISO 527
Strain at break 2.1 / 2.1 % ISO 527
Flexural modulus, 23°C 19000 / 19000 MPa ISO 178
Flexural strength 440 / 380 MPa ISO 178
Charpy impact strength, +23°C 90 / 83 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 75 / 75 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 13 / 13 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 12 / 11 kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 325 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 280 / * °C ISO 75-1/-2
Temp. of deflection under load, 8.00 MPa 237 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 14 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 47 / * E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm -
Other propertiesdry / condUnitTest Standard
Density 1650 / - kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 340 °C -
Mold temperature 130 °C -
Injection pressure 75 MPa -
Diagrams
Viscosity-shear rate , AKROMID® T5 GF 50 black (6247), PPA-GF50, Akro-Plastic
Shearstress-shear rate , AKROMID® T5 GF 50 black (6247), PPA-GF50, Akro-Plastic
Specific volume-temperature (pvT) , AKROMID® T5 GF 50 black (6247), PPA-GF50, Akro-Plastic
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
General Chemical Resistance
Applications
Automotive, Electrical and Electronical
Regional Availability
Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.